91
Printer Calibration - Error Messages Description and Corrective Action
Off line: Error: TPH-POS
Press RESET to Continue
This message indicates an error
occurred, in the Thermal Print Head
Position Sensor (TPH-POS), during the
sensor calibration procedure.
This error can occur when:
• Media dust or debris obstructs the
Thermal Print Head Sensor.
• The Thermal Print Head Sensor or
Thermal Print Head Solenoid cable
fails or is not connected properly.
• The Thermal Print Head Sensor or
Thermal Print Head Solenoid fails.
• A component fails on the Main
Controller PCB.
To correct this error:
1. Perform the cleaning procedures and
vacuum out all media dust and debris.
2. If this error continues, power the unit
off and check internal cable
connections
