
2. Pour the liquid detergent in the
compartment .
3. Close the detergent dispenser.
13.8 Starting a programme
1. Touch the Start/Pause button to
start the programme.
The related led stops flashing and stays
on.
The door is locked.
The window describing the running
programme pops up, showing:
• The programme name.
• The remaining time to
programme end.
• The progress bar.
• The ProSense phase first and then
the running programme phase.
• The indicator . When it is on, it
is still possible to stop the cycle
and add clothes.
• The door locked indicator ,
when the indicator goes off.
• The estimated cycle end time.
• The shortcut .
Cottons 40
3h01min
Washing
Finished at 15:42
The drain pump can operate
shortly before the appliance
fills water.
2. If necessary, tap on to enter the
option list and activate the Child
Lock option. Refer to "Child Lock"
section in the "Options" chapter.
The shortcut
shows up. Keep
pressed for about three seconds to
deactivate the Child Lock.
Starting a programme with
delay start
1. Touch the Start/Pause button to
start the programme.
The related led stops flashing and stays
on.
The door is locked.
The appliance starts the countdown and
the door is locked.
Cottons 40
1h29min
Finished at 15:36
Starts in
Reset
2. Tap on Reset to cancel the delay
start and then touch the Start/Pause
button or wait until the countdown is
completed.
The programme will start normally.
The ProSense detection
starts at the end of the
countdown.
During the cycle, the display
will inform you about each
running phase (e.g. washing,
rinsing and so on).
ENGLISH 35