When you activate the
appliance again, the display
shows the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
13.14 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the
water of the last rinse, the programme is
completed, but:
• The display shows 0 min and the
Start/Pause button starts flashing.
• The drum still turns at regular intervals
to prevent the creases in the laundry.
• The indicator is still on and the
door stays locked.
• You must drain the water to open the
door:
1. Touch the Start/Pause button:
• If you have set
, the appliance
drains the water and spins.
• If you have set , the appliance
only drains the water.
2. If necessary, change the spin speed
proposed by the appliance: touch
the Start/Pause button to pause the
programme; tap on and then on
the Spin Speed bar.
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button for a few
seconds to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
14. SETTINGS
14.1 Introduction
1. In the programme summary screen,
just tap on the screen to return to the
programme list screen.
2. Scroll the list up or down to find
Settings.
Settings
Machine Clean
Spin
OKOPower
ColourPro
3. Tap on the shortcut to enter the
setting menu.
4. Scroll the setting list up or down to
find the setting you want to change.
14.2 Set Clock
To change the time:
1. Tap on the Set Clock bar to enter
the submenu.
2. Scroll the minute and the hour bars
right or left to set the current time.
Set Clock
01h00min
<Programmes
Info
01 >
02 >
< 59
< 24
00
min
01
h
3. Tap on the Set Clock bar to return to
the machine setting list or tap on the
Programmes bar to return to the
programme summary screen.
14.3 Set Language
To change the language:
1. Tap on the Language bar.
2. Scroll the language list up or down to
find the desired language and hold it
pressed.
ENGLISH
37
