13.9 The ProSense load
detection
After touching the Start/Pause button:
1. The ProSense starts the laundry load
detection to calculate the real
programme duration. The display
shows the message Adjusting
programme to current load.
The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
2. After about 20 minutes the display
shows the new programme duration,
the expected programme time and
advise you about the running phase.
The ProSense detection is
carried out with complete
washing programmes only.
13.10 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Start/Pause button .
The related led start flashing.
2. Tap on to change the options.
In the option list only the available
options will be active.
3. Touch the Start/Pause button again.
The washing programme continues and
the programme duration can change.
13.11 Cancelling a running
programme
1. Press the On/Off button to cancel
the programme and to deactivate
the appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste.
13.12 Opening the door
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
If is on: the water
temperature and level are
not high and it is still
possible to open the door
and add clothes.
While a programme or the delay start
operates, the appliance door is locked.
1. Touch the Start/Pause button .
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pause button.
The programme or the delay start
continues.
13.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
The display tells that the cycle is finished
and shows 0h00min.
The Start/Pause button goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to
deactivate the appliance.
After five minutes after the end of the
programme, the energy saving function
automatically deactivates the appliance.
www.aeg.com
36
