12.15 Remote Start Mode
The remote start is available
after you have completed
the App installing and
downloading and washing
machine wireless
connection. Refer to "Wi-Fi
Connectivity setup" chapter.
With this option you can start a washing
programme remotely.
Tap on the Remote Start Mode bar to
activate it.
When you return to programme
summary screen, the shortcut will be
on and the door will be locked.
If Remote Start Mode is
activated, the Stand-by
function doesn't deactivate
the appliance.
13. DAILY USE
WARNING!
Refer to Safety chapters.
13.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the programme BEFORE
you put the laundry in the
drum.
13.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
13.3 Activating the appliance
and setting a programme
Press the On/Off button to turn the
appliance on.
A short tune sounds (if activated). The
appliance proposes Cottons as default
programme.
The led of Start/Pause button flashes.
13.4 Stand-by function
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
• You do not use the appliance for 5
minutes before pressing the Start/
Pause button and turning the
appliance on.
Press the On/Off button to activate
the appliance again.
• After 5 minutes from the end of the
washing programme.
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
If Remote Start Mode is
activated, the Stand-by
function doesn't deactivate
the appliance.
13.5 Setting a programme
1. Turn the programme dial to set the
desired programme.
www.aeg.com
32
