PAGE 7
CONTROL SWITCH (DODGE CARAVAN,
J
OURNEY, JEEP LIBERTY, AND TOWN & COUNTRY)
1. C
UT CLEARANCE FOR SWITCH AT RIGHT SIDE OF STEERING
COLUMN. FOR DODGE CARAVAN, JOURNEY, JEEP LIBERTY,
AND TOWN & COUNTRY USE FIGURE 9. FOR DODGE
NITRO USE FIGURE 10.
2. U
SE (2) #10, T25 SCREWS PROVIDED IN HARDWARE BAG
TO MOUNT CRUISE CONTROL SWITCH. FIGURE 11
3. L
OCATE WHITE 6 PIN CONNECTOR INSIDE STEERING WHEEL.
INSERT CRUISE CONTROL HARNESS WIRES TO THE FOLLOW-
ING PIN LOCATIONS IN BACK-SIDE OF CONNECTOR: PINK
WIRE TO PIN 4; YELLOW WIRE TO PIN 5; VIOLET WIRE
TO PIN 6. CONNECT BLACK 3 PIN CONNECTOR OF CRUISE
CONTROL HARNESS TO CRUISE CONTROL SWITCH. FIGURE
12
INSTALLATION
2”
1”
1”
1”
1”
1”
(2) TORX-25
SCREWS
FIGURE 12
YELLOW WIRE
TO PIN 5
VIOLET WIRE
TO
PIN 6
PINK WIRE
TO
PIN 4
FIGURE 9
FIGURE 10
FIGURE 11
TOWN & COUNTRY,
JEEP LIBERTY, JOURNEY
NITRO
