PAGE 5
DODGE NITRO, CARAVAN, JOURNEY,
T
OWN & COUNTRY, AND JEEP LIBERTY
1. REMOVE THE NEGATIVE BATTERY CABLE BEFORE INSTALLING
THE CRUISE CONTROL COMPONENTS FOR SAFETY PRECAU-
TIONS.
2. R
EMOVE STEERING COLUMN SHROUD. REMOVE AIRBAG BY
USING FLAT HEAD SCREWDRIVER TO RELEASE (3) METAL
CLIPS AS SHOWN IN
FIGURES 1,2.
3. P
RESS IN SIDES OF BOTH CONNECTORS TO REMOVE AIRBAG
AS ILLUSTRATED IN FIGURE 3.
VEHICLE PREPARATION
CAUTION: ENSURE THAT BATTERY HAS BEEN
DISCONNECTED FOR MORE THAN 90 SECONDS
PRIOR TO REMOVAL OF AIRBAG; FAILURE TO HEED
THIS WARNING MAY RESULT IN AIRBAG DISCHARGE
AND MAY CAUSE SERIOUS INJURY OR DEATH
.
CAUTION: BE SURE TO STORE AIRBAG FACE UP AS
ILLUSTRATED IN FIGURE 3A TO REDUCE INJURY IN
EVENT OF ACCIDENTAL DISCHARGE OF AIRBAG
.
FIGURE 1
RELEASE METAL CLIPS
FIGURE 2
STORE AIRBAG FACE UP AS ILLUSTRATED BELOW
RELEASE METAL CLIPS
BEHIND STEERING WHEEL
FIGURE 3A
FIGURE 3
REMOVE (2) AIR-BAG
CONNECTORS
