Next start tucking the wires into the space between the rubber trim and the headliner. I have
highlighted the path in the picture below. Use the same procedure on the B-pillar as you did
on the A-pillar.
Keep tucking after the B-pillar along the headliner, and continue tucking down the C-pillar
until you get to the black plastic trim. Again pull at it slightly and tuck the wires in. Then push
them into the space between the fixed seat back and the C-pillar. If you reach around the left
side of the fixed seatback (with the folding seatback folded down) you meet your hands in
there somewhere to pull the wires the rest of the way through.
