60203_revB Page 32 of 35
2. Check that all hose routings are free of any kinks or near any hot or abrasive surfaces that may cause
wear over time. Adjust or reroute as necessary to provide adequate slack for engine movement.
3. Refill all fluids (oil, power steering, coolant and windshield washer) to factory recommended levels.
The use of synthetic motor oil (with the factory recommended oil weight) is strongly recommended
, as it
will prolong the life of the turbocharger.
4. The use of premium octane (91+) unleaded fuel is required
for proper engine performance and to
reduce the possibility of internal engine damage from detonation.
5. Re-connect the battery.
CARB EO, SPARK PLUG GAP, & FUEL DECAL
1. Included with each Turbonetics turbo kit, are adhesive backed decals with the CARB E.O number that
is associated with this product, the spark plug gap spec, and the premium fuel required decal. Both the
CARB E.O and spark plug gap spec decal is required to be adhered in the engine compartment that is
visible and easily located by Smog Check and Service technicians. Turbonetics suggests cleaning and
adhering the labels on the upper core support where the hood latch is located.
2. Adhere the premium fuel required decal on the back side of the fuel door. Ensure surface is clean
before adhering decal.
CARB EO#
Decal
Spark Plug
Gap Decal
“Premium Fuel Required”
Decal
