60203_revB Page 34 of 35
4. Follow instructions and after the original backup has been saved, select “Install Tune”*. Follow the
instructions until "You may now unplug the Predator" appears. Programming is complete.
*NOTE: Selecting “Modify Tune” is not suggested unless you are trying to correct a specific issue.
5. Start the vehicle and check for any oil or coolant leaks prior to a test drive.
6. Test drive the vehicle, check for oil/coolant leaks again, check all fluid levels and top off as necessary. If
you are experiencing any issues of idling, bucking, running extremely rich, or poor performance, ensure
that all hose clamps are tight and all hoses are installed properly and that there are no air leaks of any
kind in the plumbing from turbo to intercooler to throttle body. If you need any support, our tech lines are
open Monday through Friday from 8am to 5pm at (805) 581-0333, or go to our website at
www.Turboneticsinc.com
to our forums under “Tech Support”.
CAMARO DRIVING NOTE: This vehicle is equipped with catalytic converters which take energy out of the
exhaust in order to heat up. This slows the initial boost response until the CATs are warm. Subsequent full
throttle performance is not as heavily affected.
EMISSIONS NOTE: This vehicle is emissions legal only when the parts are installed as described in this
instruction manual. Making changes to the kit or ECU programming voids the CARB exemption order making the
vehicle illegal for use on California roads.
