60203_revB Page 27 of 35
6. Mount the intercooler to the bottom of the core support as shown using large flat washers and the two
M8 lock nuts. Connect the 5/32” silicone hose from the waste gates to the fitting on the intercooler using a
zip tie.
7. Attach the factory air temperature sensor to the hole near the intercooler outlet.
INTERCOOLER DUCTING INSTALLATION
1. Clamp the 3” – 4” step sleeve (30502) to the intercooler outlet using a #48 hose clamp.
2. Connect the intercooler to T-body #1 tube (22132) to the sleeve with a #64 hose clamp.
Supplied rubber washer
under mounting boss and a
M8 fender washer above
and below core support.
