60203_revB Page 20 of 35
10. Install the supplied heat shield onto the turbine housing and secure with safety wire looped around
the three metal hooks.
11. Remove the bolt in the rear passenger side of the transmission. Loosely install the turbo downpipe 2-
3 bracket (22143) using the supplied M10-1.5 x 60mm bolt, washer, lock washer and nut.
12. Install the turbo downpipe #3 (22130) into the #2 pipe and loosely secure it to the bracket using a 3”
clamp.
13. Install the turbo downpipe #4 pipe (22131) into the #3 pipe and loosely clamp using an additional 3”
clamp.
14. Remove the bolt from the driver side rear of the transmission and loosely install the cat to turbo #1
bracket (PN 22138).
15. Pre-position one 2 ½” clamp on each cat and two clamps (one for the bracket and one for the pipe
joint) onto the cat to turbo #2 pipe. Slide the cat to turbo #1 pipe (22125) onto both cats and onto the #2
pipe.
