60203_revB Page 23 of 35
11. Pre-install 2 ½” clamps onto the turbo exhaust. Slide the tail pipes through the rear valance. Line up
the modified factory cat back and slide it forward into the turbo exhaust. Clamp loosely and reconnect all
factory rubber hangers.
12. Check all pipes for proper clearance and tighten all
clamps and brackets.
RADIATOR HOSE INSTALLATION
1. Install the lower radiator tube (22135) using a 1 3/8” coupler on the bottom and a 1 ½” hose coupler
on the top. Secure with four #24 clamps.
3 ½”
Cut Here
