60203_revB Page 19 of 35
7. Install the turbo downpipe #2 pipe (22129) into the space between the A/C compressor and the
frame. The flared end should be facing the turbo as shown below. Loosely secure it with a 3” clamp.
8. Cut a 17” piece of 5/8” hose. Install an 8” piece of heat sleeve over hose as shown. Install the
supplied 5/8” hose (with heat shielding) onto the original location where the upper radiator hose teed off
to the bottom of the engine. Secure with a hose clamp.
9. With a 3” clamp pre-installed, slide the turbo downpipe #1 pipe (22128) into the #2 pipe. Clamp it
loosely onto the turbine housing outlet using a 3” v-band clamp (30242).
