WARNING! Before downloading the new software into your vehicles compute (PCM), make sure to
turn off all power consuming accessories: heater, A/C, radio, dome light, etc. Turn off the daytime
running rights by applying the emergency brake or by turning the headlamp switch counter-
clockwise. Follow the steps below to remove all recommended fuses and any additional power
fuses from all aftermarket add-on accessories i.e.: stereo amplifiers, DVD players, TV monitors,
MP3 players and anti-theft equipment. Keep all doors closed during programming. Never remove
the programming cable during programming and always follow the instructions on the handheld unit
display. Failure of any of the above instructions can cause a “NO RESPONSE” from the PCM or
permanent damage to the vehicle PCM.
184. Ensure vehicle is off and the keys are out
of the ignition. Locate the interior fuse
panel inside the driver door as shown.
185. Remove the 10 AMP “SEO ACCY” fuse
in the top middle section of the fuse box
as shown.
186. Remove the cover from the “Exterior
Fuse Panel” located under the hood on
the drivers (left) side. Remove the six
fuses labeled SEO B1, SEO IGN, INFO,
SEO B2, RADIO and RADIO AMP.
Download the Micro tuner following the
instructions that came with the Micro
tuner.
187. Vehicle Programming Instructions For
