SCION xA 2006 - SECURITY WITH RKE (V3)
Procedure
Page 8 of 22 pages
Issue: C 05/24/05
DIO
(q) Locate and disconnect the white 9P
connector and white 13P connector from the
back side of the driver's side J/B. (Fig. 3-9)
(r) Plug in the V3 harness' white 9P connectors
between the driver's side J/B and the vehicle
harness' 9P connector. (Fig. 3-10)
(1) Verify the connectors are plugged in
securely.
(s) Plug in the V3 harness' white 13P connectors
between the driver's side J/B and the vehicle
harness' 13P connector. (Fig. 3-10)
(1) Verify the connectors are plugged in
securely.
(t) Secure the 9P connectors and 13P connectors
to the vehicle harness with two large wire
ties. (Fig. 3-10)
4. V3 Harness Installation. (Steering Area)
(a) Route the V3 harness toward the lower part
of steering wheel. (Fig. 4-1)
(b) Locate and disconnect the white 6P
connector from the lower part of steering
wheel. (Fig. 4-1)
Fig. 4-1
V3 Harness
6P (White)
Fig. 3-9
J/B
13P (White)
9P (White)
J/B Back
Side View
V3 Harness
Fig. 3-10
Side Cutter
13P (White)
J/B
9P (White)
V3 Harness
Back Side View
13P (White)
13P (White)
Large Wire Tie
9P (White)
Large
Wire Tie
J/B
Back Side View
