SCION xA 2006 - SECURITY WITH RKE (V3)
Procedure
Page 11 of 22 pages
Issue: C 05/24/05
DIO
(c) Route and secure the V3 harness to the
vehicle harness with two medium wire ties
behind the driver's center cluster area.
(Fig. 6-3)
(d) Route and secure the V3 harness to the
vehicle's bracket with one medium wire tie
behind the center cluster. (Fig. 6-4)
(1) Pass the wire tie through the vehicle
bracket's hole.
(e) Route and secure the V3 harness to the
vehicle harness with one medium wire tie in
the glove box area. (Fig. 6-5)
(f) Locate the vehicle harness' white 1P
connector in the glove box area. Remove the
tape from the connector. (Fig. 6-6)
Fig. 6-6
V3 Harness
Tape
1P (White)
Vehicle's 1P (White)
Fig. 6-5
Side Cutter
1P (White)
V3Harness
Medium Wire Tie
Fig. 6-3
Side Cutter
Medium
Wire Ties (x2)
V3 Harness
Fig. 6-4
Side Cutter
V3 Harness
8P, 12P,
22P
