All systems are shipped in Stand-Alone mode: [1] The PLx Network light is green and [2] you should see “QRSPNO ####” when viewing your local Wi-Fi devices .
These instructions are used to reset the PMII and the ASUS wireless to the default conguration.
For best results, go to qrsmusic.com. to download and install the latest PMII driver update. Instructions using Driver V3.66.
If the “Power” light is yellow, tap the PLx button once so that the light turns green.
Point the remote at the button on the PLx box. The “System” light will ash, w/ voice prompts, on remote control commands.
Using a QRS Remote: Press SHIFT then FUNC then 9 9 0.
If you have one of the smaller QRS remotes: press F1/Source then 9 9 0..
The PLx Network light should now be green.
Press and Hold the “Restore’ button,
on the back of the ASUS
, until the “power” light ashes at least 3 times.
DISCONNECT the Ethernet cable from PMII or the ASUS device.
View the available wireless devices using your iPad, iTouch, Android device or Wireless Computer.
If the ASUS was “restored” correctly you should see “ASUS” in your available Wi-Fi devices list.
Connect to the “ASUS” from the list and wait until a connection is established.
Apple devices may automatically open the Authentication screen when connection.
Enter admin in the User Name and Password elds.
If you are using an Android or a Computer and Google Chrome:
In your web browser, enter 192.168.1.1 in the URL address window.
Enter admin in the User Name and Password elds.
Click the Log In button.
The ASUS programming window opens.
Select Access Point.
Enter the “QRSPNO” in the Wireless name (SSID) eld.
Our example uses QRSPNO Test
Click the APPLY button.
The ASUS will apply, save and restart with the new settings.
Close the browser window when 100% complete.
Wait for the voice prompt to report: “Standby”...“Connected”...”IP Address is...192.168.1.1”. [Press FUNC INFO to repeat IP address]
You can now wirelessly connect to PNOmation II via the ASUS wireless access point..
Enter [192.168.1.1] in your Internet web browser, Google Chrome or Safari..
Reconnect the Ethernet cable.
ASUS 330N3G Wireless
set as an Access Point (AP)
PNOmation II
Wireless Computer
or
Android Device
or
Apple iPad/iTouch
Default Conguration
Set by QRS
No access from home Network
IP Address 192.168.1.1is assigned by PMII
Power Cable
Apple
Google
Android
How to Setup the ASUS WL 330N3G Wireless for PMII in Stand-Alone Mode
Power System Network
PLx
