How to Congure the EnGenius ETR9330 for QRS “Network” Mode:
You will need the information about your home network:
Network Name (SSID)
Encryption Type
Key Type
Encryption Key
On the QRS PNOmation II remote control:
Press the following buttons in sequence…
SHIFT FUNC 9 9 1
Third light ashes red/green and then solid yellow.
Connect to QRSPNO.
Open Google Chrome, Android browser, or Safari, and navigate to 192.168.0.1
Enter “admin” as the User Name and Password.
Select “Wizard”.
Press the “Next” button.
Select “Client Bridge Mode”
Press the “Next” button.
Enter the Network Name (SSID) to match your home Wi-Fi device.
Click on the Encryption drop-down box and select mode to match your home Wi-Fi.
Select/Enter the following to match your home’s Wi-Fi device:
Encryption Type
Key Type
Encryption Key
Press the “Next” button.
[Windows 7 & Google Chrome Example]
Open Safari or Google Chrome and enter the IP address heard from the speaker.
Verify “Setup Successful”
Press the “Reboot” button.
Wait for system reboot.
Close browser.
Connect to your home network.
On the QRS PNOmation II remote control:
Press the following buttons in sequence…
SHIFT INFO
Note the IP address heard from the speaker.
