How To Setup the ASUS WL 330gE Wireless for PMII in Stand-Alone Mode
ASUS 330gE Wireless
set as Access Point (AP)
PNOmation II
Wireless Computer
or
Android Device
or
Apple iPad/iTouch
Default ConfiguraƟon
Set by QRS
No access from home Network
IP Address 192.168.1.1is assigned by PMII
Reset
All systems are shipped in Stand-Alone mode: [1] The PLx Network light is green and [2] you should see “QRSPNO ####” when viewing your local Wi-Fi devices .
These instructions are used to reset the PMII and the ASUS wireless to the default conguration.
For best results, go to qrsmusic.com. to download and install the latest PMII driver update. Instructions using Driver V3.66.
If the “Power” light is yellow, tap the PLx button once so that the light turns green.
Point the remote at the button on the PLx box. The “System” light will ash, w/ voice prompts, on remote control commands.
Using a QRS Remote: Press SHIFT then FUNC then 9 9 0.
If you have one of the smaller QRS remotes: press F1/Source then 9 9 0.
The PLx Network light should now be green.
View the available wireless devices using your iPad, iTouch, Android device or Wireless Computer.
If the ASUS was “reset” correctly you should see “ASUS” in your available Wi-Fi devices list.
Connect to the “ASUS” from the list and wait until a connection is established.
Open Apple Safari, Android Web Browser or Google Chrome on a Computer:
In your web browser, enter 192.168.1.220 in the URL address window.
The “Authentication Required” dialog box will appear.
Enter admin in the User Name and Password elds.
Click Log In.
The ASUS programming window opens.
Select the AP Tab
Enter “QRSPNO for the SSID name.
Click the FINISHED button.
Click OK
The ASUS will save and restart with the new settings
Wait for the progress to complete, 100%.
At this point you will loose connection to the ASUS...
Close the browser window when the progress is 100% complete.
Wait for the voice prompt to report: “Standby”...“Connected”...”IP Address is 192.168.1.1”
[FUNC INFO to repeat the IP Address.]
Connect your wireless device to “QRSPNO”.
Open Google Chrome, Safari or your Android browser and enter 92.168.1.1 to connect to PMII.
Press and hold the Reset button on the edge of the ASUS until the power light ashes at least three times.
Apple
GoogleChrome
Android
Power System Network
PLx
