47
Procedure:
1
In the Alert Policy Tab, select the slot for which you have to configure the
Alert policy. That is, In the
Event Filter Entry
Page, if you have chosen
Alert Policy number as 4, you have to configure the 4th slot (the slot with
Policy Number 4) in the Alert Policy Tab.
2
Select the slot and click
Add
to open the
Add Alert Policy Entry
Page as
shown in the screenshot below.
3
Policy Entry #
is a read only field.
4
Select the
Policy Number
from the list.
5
In the
Policy Configuration
field, check
Enable
if you wish to enable the
policy settings.
6
In the
Policy Set
field, choose any of the Policy set from the list.
7
In the
Channel Number
field, choose particular channel from the
available channel list.
8
In the
Destination Selector
field, choose particular destination from the
configured destination list.
NOTE: LAN Destination has to be configured under:
Configuration > PEF > LAN Destination. That is if you select the number 4 for
destination selector in Alert Policy Entry page, then you have to configure the 4th
slot (LAN Destination Number 4) in the LAN Destination tab.
9
In the
Alert String
field, enable the check box if the Alert policy entry is
Event Specific.
10
In the
Alert String Key
field, choose any one value that is used to look up
the Alert String to send for this Alert Policy entry.
11
Click
Add
to save the new alert policy and return to Alert Policy list.
12
Click
Cancel
to cancel the modification and return to Alert Policy list.
13
In the Alert Policy list, to modify a configuration, select the slot to be
modified and click
Modify
.
