72
flash operation, the MegaRAC
®
card must be reset. This means that you must close
the Internet browser and log back onto the MegaRAC® card before you can
perform any other types of operations.
To open Firmware Update page, click Maintenance > Firmware Update from
the main menu. A sample screenshot of Firmware Update Page is shown in
the screenshot below.
Procedure:
Click
Enter Update Mode
to upgrade the current device firmware. As
below step by step:
1
Closing all active client requests.
2
Preparing device for firmware upgrade.
3
Uploading firmware image.
4
Verifying firmware image.
5
Flashing firmware image.
6
Resetting Device.
NOTE: You can now follow the instructions presented in the subsequent pages to
successfully update the card?s firmware. The device will reset if update is
canceled. The device will also reset upon successful completion of firmware
update.
