Financial Points of contact shall be confirmed
Any open or remaining order or contractual documents if not previously completed shall
be.
MISCELLANEOUS SUPPLIED ITEMS
The Town is most interested in ensuring the equipment be mounted in the exactly as it intended
therefore the following shall be completed after a pre-installation meeting with the entire Town.
Mounting options for all the below listed will be decided at this meeting and work shall be
completed prior to delivery and acceptance to the department.
Hurst hydraulics
2ea Hurst hydraulic reels shall be removed from the current rescue on & mounted in the upper
portion of RR1 compartment
1ea Hurst twin flow electric hydraulic pump shall be removed mounted and wired to the 240v
circuit mentioned earlier in this spec. Note: The intended location is between the hyd reels in the
upper most portion of the RR compartment with the tools being preconnected to it.
Cascade system
An NFPA compliant American air works space saver two bottle fill station shall be supplied &
installed in the L4 compartment (location to be determined).
An American air works 6 bottle 6000 psi fill station with options for future installation of a Sierra
electric powered booster pump shall be supplied & installed in the L4 compartment(location to be
confirmed at equipment installation meeting) Note: 240v outlet needed for booster pump is
included earlier in the specifications
20 SCBA storage cylinder storage units shall be supplied adjacent to the Fill station (ten each side)
so as to allow for easy visual identification of full and need to be filled cylinders when using the
cascade system.
The departments six 6000 psi cascade cylinders shall be reused for and installed vertically between
the L4 & R4 compartments installation, plumbing from the cylinders to the fill panel shall not be
reused.
RV Awning
There shall be provided and installed a 18’ wide Heavy duty RV awning on the Left side of the
rescue body. This awning shall have the proper installation and mechanisms to allow for
deployment by an average size fire fighter (5’-6”) tall. The awnings material shall be of Heavy duty
type as it is intended to be used for protection from the elements year around.
CAFS system
There shall be provided and installed in the front of the body behind the vertical divider mentioned
earlier in this specification a compressed air foam system. This system shall contain a minimum 60
gallon vertically mounted pressure capable storage tank that will contain the water & foam
solution. This system shall be easily replenished by simply depressurizing the tank and refilling
with water and batch mixed class A foam. There shall also be a compressed air cascade type
