delivering a total of 210,000 lumens of floodlighting.
The light towers functions shall including "auto stow feature " and shall be operated by a hardwired
pistol grip remote that is supplied with the tower. The light tower control shall be located in
compartment L1. A green strobe light shall be supplied with the light tower mounted at the highest
position. A switch shall be provided on hand held control head for strobe light.
An amber flashing Whelen OS Series LED light shall be mounted on the face of the overhead
panel. A chrome flange is to be supplied with the light. The light will activate when the light
tower is raised and the parking brakes are released. A buzzer shall be provided with the light. A
label shall be applied adjacent to the light 'LIGHT TOWER RAISED'.
IDENTIFICATION AND SAFETY LABELS
A permanent label shall be installed in the driver's compartment to specify the quantity and type of
all of the fluids in the vehicle:
A permanent label shall be installed in the driver's compartment specifying the maximum number
of personnel the vehicle is designed to carry per NFPA standards. It shall be located in an area
visible to the driver.
A permanent label shall show the completed apparatus overall height, length and gross weight
rating (GVWR).
An accident prevention sign stating "DANGER PERSONNEL MUST BE SEATED AND SEAT
BELTS MUST BE FASTENED WHILE VEHICLE IS IN MOTION OR DEATH OR SERIOUS
INJURY MAY RESULT" shall be placed so it is visible from all seating positions.
An accident prevention sign stating "DANGER DO NOT RIDE ON REAR STEP WHILE
VEHICLE IS IN MOTION, DEATH OR SERIOUS INJURY MAY RESULT" shall be placed so it
is visible from the rear step of the vehicle.
WHEEL CHOCKS
One (1) pair of heavy duty, high tensile molded aluminum wheel chocks shall be provided with the
apparatus. The wheel chocks shall have a bright yellow powder coat finish for high visibility,
safety and corrosion resistance. No exception shall be allowed to these requirements. Two
Stainless steel chock holders shall be provided and mounted on the left side of the apparatus below
the front body compartment.
ELECTRIC CORD REEL
Two (2) Hannay model ECR1618-17-18 electric rewind cord reels shall be supplied and installed.
The cable reel(s) shall be a 12-volt electric rewind type.
The cord reels shall be equipped with a Hannay SR-50 control to provide a 50% reduction in motor
speed.
The reels shall be mounted Centered of the L2-R2 compartment ceiling and mounted one to deploy
primarily to the driver’s side & one to primarily to the officers side
ELECTRICAL CORD
Two hundred feet (200') of 10/4 SOOW (yellow) cord shall be installed on each reel, complete with
an HS-3 ball stop.
