ALUMINUM TRAY - PULL OUT-TRANSVERS
Two (2) heavy duty dual pullout full transverse tray shall be installed, it shall be equipped with
Slide Master rollers and a latch to hold the tray in the in and out position and shall be made from
.190" aluminum with a maximum capacity of 2000 pounds.
The heavy duty pullout trays shall be installed in following compartments.
L2-R2
L3-R3
DRI-DEK MATTING - TRAYS
The surface of the eight above aluminum trays shall be covered with Dri-Dek mat for improved
ventilation that shall also provide a non-slip surface. The Dri-Dek mat shall be black in color.
ALUMINUM TRAYS - PULL OUT-ADJUSTABLE
One heavy duty vertically adjustable pullout tray shall be installed and shall be equipped with roller
bearing slides and a gas shock to hold the tray in both the in and out positions and shall be made
from .190" aluminum.
The heavy duty pullout tray shall be installed as follows:
1ea RR1
ALUMINUM TRAYS - PULL OUT AND DOWN
Six 47” pullout and down trays shall be installed and shall be constructed of formed .190"
aluminum with a maximum capacity of 250 pounds.
Each pullout and down tray shall be installed as follows:
1ea L2, R2, L3,R3,RR1
2ea R4
DRI-DEK MATTING - SHELVES/TRAYS
The surface of the six aluminum trays shall be covered with Dri-Dek mat for improved ventilation
that shall also provide a non-slip surface. The Dri-Dek mat shall be black in color.
VERTICAL DIVIDERS
One vertical divider shall be provided in the L1-R1 exterior compartments. The placement of this
divider shall be as needed to shield the Cafs Unit from equipment in the transverse compartment.
PULL OUT VERTICAL TOOL BOARD
Three full height vertical dual side pull out tool board shall be installed in the L1-R1 exterior body
compartments.
Each board shall be equipped with Heavy duty roller slides and a latch to hold the board in place
when stored and deployed. The tool board shall be made from .190" aluminum. Both sides of the
three tool boards shall be covered with FoxTrax or equivalent aluminum extrusion tool mounting.
POLY BIN
Three white .5 thick poly bins with lifting slots shall be provided. The bin(s) shall measure 9.5"
wide x 20.0" long x 9.0" high.
