BODY SIDE SCENE LIGHTS
There shall be two each side body side scene lights installed as high as possible and spread out as
far as possible on both sides of the apparatus body. The lights shall be Whelen M6ZC white LED
Scene lights. The scene lights shall be operated by a switch located in the driver's area of the cab.
BODY REAR SCENE LIGHTS
There shall be two rear scene lights installed as high and as wide as possible on both sides of the
rear of the apparatus body.the lights shall be Whelen M6ZC white LED Scene lights mounted on
Whelen M6P15C 15° angled bright finished housings.
The rear scene lights shall be operated by
A switch located beneath the left rear step or a switch in the driver's switch panel. If the scene light
is left in the 'ON' position the lights shall automatically turn off when the truck is parking brake is
released.
Additionally, the rear scene lights shall come on to supplement the back-up lights whenever the
transmission is placed into reverse.
FORWARD FACING BROW LIGHT
One brow light shall be provided and mounted centered on the leading edge of the cab roof facing
forward. The light shall be a Fire Research Optimum OPA800. The lamp head shall have one
quartz halogen 1000 watt 120 volt bulb. The brow light shall have a white housing
A switch shall be located in the cab switch panel for the brow light
FULL LENGTH 'COFFIN' COMPARTMENT, LEFT & RIGHT SIDE
Two (one each side) full length compartments shall be provided on top of side compartments with
top access. The compartment vertical walls shall be constructed of stainless steel and shall be
approximately body length x 20-1/2" deep x 24" wide. There shall be a fixed box at the front and
the rear of the compartment to provide light mounting on the sides. A decorative aluminum
diamond plate trim piece shall be added to the area above the body side compartments and the
coffin compartment sides where they meet the compartment roof.
ALUMINUM TREADPLATE WALKWAY
An aluminum tread plate walkway shall be provided for the full length compartments. The
walkway step surface shall be covered in aluminum diamond plate meeting the current revision of
NFPA 1901 for step requirements.
WALKWAY LIGHTS
Four (4) round incandescent lights shall be provided along the walkway side of each coffin
compartment. The lights shall be spaced equally along the length of the compartment and shall
illuminate when the parking brake is set.
GRAB HANDLES
A pair of grab handles shall be provided and installed on the left coffin compartment. One (1) at the
front and one at the rear of the compartment to aid in accessing the compartment.
QUARTZ LIGHTS
Four FRC "Optimum" model OPA250-S75, 120-volt / 750-watt recessed quartz lights shall be
