front of the apparatus, centered beneath the front bumper.
REAR TRAILER RECEPTACLE
One (1) 7 pole trailer light receptacle with a weatherproof cover and mating plug with a 6 inch
pigtail shall be provided on the rear of the apparatus.
12V RECEPTACLES
Four 12-volt DC receptacle with a weather proof cover shall be provided adjacent to each receiver
for power to the portable winch
QUICK MOUNT RESCUE WINCH
A Ramsey 9,000 lb. Winch assembly, Model QM 9000 12V, shall be provided.
This winch is to have the following features:
Mounts directly to a class III hitch.
Gear reduction ratio 138:1.
One (1) cam action clutch to enable free spooling.
One (1) 12' heavy duty remote control switch.
One (1) length of 105' of 5/16" diameter wire rope with replaceable clevis hook.
DEEP ALUMINUM SHELVES - ADJUSTABLE
One adjustable aluminum shelf shall be installed and shall have a flange 1-1/2" deep and a
minimum material thickness of .190" Each shelf shall be adjustable in height and held in place by
four extruded uprights.
Each adjustable shelf shall be installed as follows:
1ea RR1
The surface of the aluminum shelf shall be covered with Dri-Dek mat for improved ventilation that
shall also provide a non-slip surface. The Dri-Dek mat shall be black in color.
ALUMINUM TRAYS - PULL OUT
Four heavy duty pullout 250lb trays shall be installed and shall be equipped with roller bearing
slides and a gas shock to hold the tray in both the in and out positions and shall be made from .190"
aluminum. Each heavy duty pullout tray shall be installed as follows:
L1 lower portion of compartment
L2 lower portion of compartment
R1 lower portion of compartment
R2 lower portion of compartment
ALUMINUM TRAYS - PULL OUT HD
Two heavy duty pullout 500lb tray shall be installed on the floor of the compartment and shall be
equipped with hd roller bearing slides and a gas shock to hold the tray in both the in and out
positions and shall be made from .190" aluminum. The heavy duty pullout trays shall be installed in
the following compartments.
RR1
R4
