COMPARTMENT VENTILATION
Each compartment shall be provided with a laser cut stainless steel louver to provide adequate
ventilation.
There shall be filters provided for compartments L1, L3, R1, R3 and RR1. The protective louver
covering the filter shall be removable to allow for filter changing. The filter shall be 100% virgin
nylon fiber in an open web design that is USDA approved. The filter shall be chemically treated
with Dimethyl Benzyl Ammonium Saccharinate to aid in the reduction of bacteria and fungi.
LEFT SIDE COMPARTMENT DIMENSIONS
FORWARD OF WHEEL WELL - L1 & L2
There shall be two rescue style, full height compartment ahead of the rear wheels. The first
compartment shall have approximate dimensions of 56" wide x 77" high x transverse and the
second compartment shall have approximate dimensions of 52" wide x 77" high x transverse..
ABOVE WHEEL WELL - L3
There shall be one high side compartment centered over the rear wheels. It shall have approximate
dimensions of 52" wide x 47" high x transverse.
REAR OF WHEEL WELL - L4
There shall be one rescue style, full height compartment behind the rear wheels. It shall have
approximate dimensions of 51" wide x 77" high x 24" deep.
TRANSVERSE AREA
At the left rear of the L4 compartment there is a transverse area through to the forward section of
the R4 compartment with dimensions of 23" wide x 48" deep x 59" tall. This area is forward of the
RR1 compartment.
ROLLUP DOOR CONSTRUCTION -
All body compartments shall be provided with satin finish Gortite roll up doors.
The door latches shall be non-locking stainless steel lift bars and shall be provided with a magnetic
door ajar switch system.
The compartment roll-up doors shall have cloth straps, one (1) per door, to assist in the closing of
the roll-up doors.
FENDER SIDE SKIRTS
There shall be stainless steel fender side skirts located in the area of the rear wheels. The design of
the fender sides shall be a minimal length to provide maximum compartment space in the
apparatus.
FUEL FILL - SIDE BODY
The fuel fill shall be located in the rear fender area on the left side of the apparatus body. The
spring loaded fuel fill door shall have "Diesel Fuel" laser cut in the face of the door. There shall be
a vent line from the fuel tank to beneath the fuel cap to aid in fueling of the truck.
