TOYOTA SCION XB 2005 - OVERHEAD VIDEO(AUTOCINEMA)
6. Attach 12' harness to wire puller and pull
through glove box opening (Fig.K6) Fig.K6
7. Feed wire puller through radio opening (Fig.7-8)
8. Pull wiring through radio opening (Fig.7-8)
Fig.K7-8
9. Remove wire puller.
L. Install antenna
1. Peel off red adhesive backing from antenna
base (Fig.1-2) Fig. L1-2
2. Partially remove paper backing from antenna
taping (Fig.1-2)
3. Attach antenna base to upper center of wind-
shield, inserting cable above headliner (Fig.L3)
(attach offcenter if equipped with E/C mirror. Fig.L3
4. Tuck cable above headliner from center towards
passenger A-pillar (Fig.L4)
5. Peel remaining paper backing off.
6. Attach remaining antenna taping to windshield Fig.L4
from center towards A-pillars.
7. Trim off any excess taping.
M. Install wiring Fig.M1
1. Attach a red T-tap to the gray wire on the 10 pin
connector on the radio harness (Fig.M1)
Page 2 of pages
19/12/03
