TOYOTA SCION XB 2005 - OVERHEAD VIDEO(AUTOCINEMA)
J. Remove radio
1. Remove (4) screws with a #2 phillips head Fig.J1
screwdriver (Fig.J1)
2. Partially remove radio and remove (2) con-
nectors and antenna from backside (Fig.J2) Fig.J2
3. Remove radio.
K. Route wiring
1. Feed wire puller from monitor opening towards Fig.K1
front right side above headliner near A-pillar
until puller exits at windshield (Fig.K1)
2. Attach 12' harness (end with side snaps) and
antenna cable to wire puller at windshield (Fig.K2) Fig.K2
3. Pull from monitor opening until about 12" of
harness is exposed at monitor opening (Fig.K3)
4. Remove wire puller. Fig.K3
5. Feed wire puller between A-pillar and instru-
ment panel out through glove box opening (Fig.K5)
Fig.K5
Page 2 of pages
19/12/03
