TOYOTA SCION XB 2005 - OVERHEAD VIDEO(AUTOCINEMA)
D. Cutout hole for monitor
1. Align template with domelamp opening (Fig. D1) Fig.D1-2
2. Mark cutout with a marker (Fig.D2)
3. Carefully cutout hole in headliner with a utility
knife (Fig.D3)
E. Remove passenger side grab handle Fig.D3
1. Open bolt covers by prying with a NRT (Fig.E1)
2. Remove (2) bolts with a 10mm socket/ratchet Fig.E1
(Fig.E2)
3. Remove handle.
F. Remove A-pillar molding and sunvisor
1. Remove A-pillar molding with hands by starting Fig.E2
from top, pulling out, then upward (Fig.F1)
2. Remove (2) screws from sunvisor bracket
with a #2 phillups screwdriver (Fig.F2) Fig.F1
3. Remove sunvisor.
Fig.F2
Page 2 of pages
19/12/03
