SCION xA 2004 − SECURITY WITH RKE (V3)
Section II − Installation Procedure
Page 3 of 23 pages Supplier Ref #: DIO
Issue: A 06/09/03
6. Remove the two screws securing the lower
steering column cover behind the steering
wheel. (Fig. A−5)
i. Insert the key into the ignition switch and
turn it to ON to unlock the steering wheel.
ii. Turn the steering wheel left and right to
gain access to the screws.
7. Remove the lower steering column cover.
(Fig. A−6)
i. Remove the bottom screw securing the
cover.
8. Using the Nylon Panel Removal Tool, remove
the center cluster side covers. (Fig. A−7)
i. Use caution when prying center cluster
side covers to avoid damage.
9. Using the Nylon Panel Removal Tool, remove
the center cluster under panel. (Fig. A−8)
i. For manual transmission place in 4
th
gear.
STOP
Phillips Screwdriver
Fig. A−6
Screw
Column Cover
Panel Removal Tool
Fig. A−7
Side Cover
Panel Removal Tool
Fig. A−8
Under Panel
Phillips Screwdriver
Fig. A−5
Screw
Screw
