Administration Settings
Management
Cisco SPA100 Series Phone Adapters Administration Guide 120
5
Settings for SNMPv3
Bonjour
Use the Administration > Management > Bonjour page to enable or disable
Bonjour. Bonjour is a service discovery protocol that locates network devices such
as computers and servers on your LAN. It may be required by network
management systems that you use. When this feature is enabled, the ATA
periodically multicasts Bonjour service records to its entire local network to
advertise its existence.
To open this page: Click Administration in the menu bar, and then click Bonjour in
the navigation tree.
Click Enabled to enable this feature, or click Disabled to disable it. The default
setting is Enabled. After making changes, click Submit to save your settings, or
click Cancel to abandon any unsaved entries.
Set Community Enter a community string for authentication for SNMP
SET commands. The default value is private.
Field Description
Enabled, Disabled Click Enabled to enable this feature, or click Disabled to
disable it. The default setting is Disabled.
R/W User Enter the user name for SNMPv3 authentication. The
default value is v3rwuser.
Auth-Protocol Choose the SNMPv3 authentication protocol from the
drop-down list (HMAC-MD5 or HMAC-SHA).
Auth-Password Enter the authentication password.
privprotocol Choose a privacy authentication protocol from the drop-
down list (None or CBC-DES). If you select CBCDES, the
privKey encrypts the data portion of the message that is
being sent.
Privacy Password Enter the key for the authentication protocol to use.
Field Description
