Productos de la Marca Leica-biosystems

Instructions for Use V 1.9 RevD – 05/2013

7. Troubleshooting

How to eliminate the problem:

• Determinethecauseoftheerrorusingtheerrorlist(Chapter 7.3).

• Removeobstruction(s);openlidifrequired.

• Important!

Remove all cassettes which are still in the chute, in or next to the

cassette carrier or in the drying module!

These cassettes should not be reused.

• ClosethelidandpressERROR to confirm to the printer that the source

of the error has been eliminated.

• Theprinterthenverifieswhetherallprocessingpathsareunobstructed

and whether the source of the error has been eliminated.

• Iftherearestillsomeobstructionsleft,orifthesourceoferrorhasnot

been thoroughly eliminated, the printer displays another error message.

• Interruptedprintjobsareresumedwherepreviouslyleftoff.

• Ifanerrormessageisdisplayedseveraltimesalthoughallpossible

causes have been eliminated, a Reset should be carried out.

Reset:

• Pressandrelease LOADED and ERROR simultaneously.

• AResetrestorestheprintertothesamestateasdirectlyafterswitching

on. All print jobs in the print queue are deleted.

• Ifthesameerrorcontinuestobedisplayedevenafterareset,switchthe

printer off via the power switch (back panel) and, after a short waiting

period of approx. 30 sec., switch it back on. If this does not eliminate the

problem either, call Leica Technical Service.

Confirm elimination

of error

7.1 Malfunctions

If the printer malfunctions during printing, a corresponding error

code is displayed and simultaneously the LED in the ERROR button

starts flashing.