Productos de la Marca Leica-biosystems

Leica IP C

Transporting the printer

If the printer is to be shipped, the storage instructions described above

are to be carried out completely. Then, additionally make the following

preparations:

• Openthehood(4 in Fig. 36) of the printer and loosen the screw of the

flash cover.

• Then take out the flash bulb. For more information, refer to Chap. 4.6 of

this manual

• Closetheflashcoverandthehood.

• Useoriginalpackagingandsecurelyscrewtheprintertothebaseplate

(see unpacking instructions).

• Reinsert the transport anchor (27) (see Fig. 16) and secure the hood with

adhesive tape.

• Make sure that the instrument is only transported upright.

• Likewise,cleantheremovedlocationplate(70)

with the sealing lip with (clean) alcohol and a

cleaning swab (89) (Fig. 66).

• Thesealinglip(71) must be completely free of

ink residue. Check the sealing lip for damage.

Do not reuse a replacement plate with a dam-

aged sealing lip.

• Cleantheinstrumentcompletely,asdescribed

in this chapter.

Instructions for storage (continued)

Fig. 66

6. Cleaning and Maintenance