51
Leica IP C
The "ADVANCED OPTIONS" menu
Clicking onto the individual menu items opens up
a pull-down menu to their right, where you can
select the desired parameters.
Any menu items not described here are of no im-
portance for the printer. Therefore, the standard
settings of all menu items not described here
should remain unchanged.
• InthePAPER SIZE menu you select the type
of cassette, i.e. the size of
the imprintable zone of the
cassette. The cassette type
selected in this menu should
be identical to the one se-
lected in PAGE SETUP (Fig. 51).
• TheprintheadRESOLUTION can be switched
between 360 and 180 dpi.
With cassette surfaces not
appropriate for 360 dpi reso-
lution, printing results will be
poor when selecting that.
For such cassettes, 180 dpi should be selected.
• ThePAPER/OUTPUT menu item is important
above all for the multi-cas-
sette unload station.
• SAME TRAY:
cassettes keep being deposited onto a tray
until the tray is full.
• JOB IN NEW TRAY:
each print job starts with a new tray.
• NEW TRAY:
Only for special applications—do not select
this option under standard Windows pro-
grams.
Fig. 53
• PRINT QUALITY menu item
In this menu, you can select
whether an imprint is to
be applied onto a cassette
once (NORMAL) or twice
(OVERSTRIKE).
UPSIDE DOWN imprints are rotated 180°. Here
again, OVERSTRIKE can be selected.
5. Operation
When using the manual unloading
system, the values configured in the
PAPER/OUTPUT menu item are not
considered by the device.
Due to the higher ink consumption and
the substantially poorer printed image,
the OVERSTRIKE setting may not be
used.
