CommandsAppendix —A
45PK80 Series 80-Column Prin ter User’s Manual
Example
ESC EZ{CBT:F:MyPrinter}
would configure the Bluetooth Friendly
Name (AKA Bluetooth Device Name) to MyPrinter.
ESC EZ{CBT:F:BTPrinter;D:N;C:Y;E:Y;A:Y;P:Passkey1}
would
configuretheBluetoothDeviceNametoBTPrinter,theprinterwouldnot
be discoverable but would be connectable, encr yption can be u sed, authen-
tication is required, and the passkey is ”Passkey1”.
Easy Print Commands
{CT:nnn} Configures the timeout where nnn can be 15–9998 seconds. 9999 sec-
onds will caus e the printer to NEVER time out.
{CB:n} Configures the baud rate where n corresponds to the desired baud rate :
0=1200, 1=2400, 2=4800, 3=9600, 4=19.2K (19200), 5=38.4K
(38400), 6=57.6K (57600), and 7=115.2K (115200).
{CN:n} Configures the number of data bits where n can be 7 or 8
{CP:n} Config ures parity, where n can be N (no parity), E (even parity), or
O(oddparity).
{CC:n} Configures the carriage retu rn to automatically add LF to CR, where n
canbeNforCR=CR,orYforCR=CRLF.
{COMMIT} None of the two letter configuration commands will take affect until the
COMMIT command is sent. When {COMMIT} is sent, the values are
written to flash and the printer is restarted. When it restarts , it will use
the default configu ration, which in most printers is NOT Easy Print. To
do additional configuration, you will need to put the printer back into
Easy Print mode.
{CH:n} Configures handshaking. Valid values are None (N), Hardware(H),
Software(S), or Both(B)
{CR:nn} Configures the radio timeout. Values of 0 or 65535 disable the radio
timeout. Other valid values are 1–65534.
Thefollowingareconfigurableandthestatewillbeindicatedontheself
test printout, but they have no operational effect yet.
{CS:n} Configures the beeper either ON or OFF where n=Y for beeper
ON or N for beeper off.
{LP} This retu rns the printer to a line printer mode.
{S} This returns a status command. The res ponse is of the
{U:1234;P;D;O;RDY} form where the P position indicates paper is
present and an N in the same position indicates no paper. All other
characters are fixed.
{IPL: 0xAA 0x55} This ju mps the printer to the boot code for erasure and subs e-
quent downloads.
