20
• These tappets set the time periods for the central heating at 15 minute inter-
vals.
• To set a tappet, slide it gently in either direction to the required time on the
outer dial face.
• The system will switch on at the first red tappet after midnight, off at the
next blue tappet and on and off again at the second red and blue tappets.
Operating your mini minder Es-
The heater slider has 4 positions and is used to set how the heating is controlled.
Off – heating will remain off
Twice – heating will be switched on and off at the times set by the tappets
Once – heating will be switched on at the first red tappet after midnight and off
at the last blue tappet.
On – heating will remain on permanently.
The heating indicator lights up when the heating is on.
When the Mini Minder Es is in a timed mode i.e. twice or once, it is possible
to advance the next time period as follows:
The advance buttons (ADV) allow you to go forward to the next on or off time.
Simply press the ADV button and your central heating will come on if it was off,
of go off it was on. The operator returns to normal when the next on or off time
is reached.
Other controls in your system (such as thermostats) may switch your boiler on
and off. So although the heating indicator may be on, the boiler itself could be
off.
33
The control panel –
1. On/off button: Press this button to switch the washing machine on. Press the ON/OFF
button again to switch the machine off.
2. Mains light on: The light is connected to the ON/OFF button. It lights up when you press
the button, and goes out when you press it again.
3. Fabrics Button: Press this button repeatedly to select the programme on the basis of the
type of laundry to be washed. The light relevant to the selected programme will light up.
The washing machine will propose a temperature and automatically select the maximum
spin value provided for the programme you have chosen. You can change these values by
operating buttons 4 and 5.
4. Temperature button: Press this button repeatedly to increase or decrease the temperature,
if you want your laundry to be washed at a temperature different from the one proposed
by the washing machine. The relevant light will light up. Maximum temperatures are 90
degrees C for cotton, 60cdegrees C for synthetic fabrics, 40 degrees C for delicate fabrics
and wool.
By pressing the temperature and spin speed buttons simultaneously, the acoustic signal at
the end of the cycle is deactivated. By pressing these 2 buttons again the acoustic signal is
reactivated.
5. Spin speed button: Press this button repeatedly to change the spin speed, if you want your
laundry to be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
6. Options button: Press this button to select the following options:
Prewash – select this option if you wish your laundry to be prewashed before the
main wash (not available for wool)
Super rinse – this option can be selected with all programmes except the wool pro-
gramme. The machine performs 4 rinses instead of 3. This option is recommended for
people who are allergic to detergents.
Quick wash – For laundry that is only slightly soiled (again, not for wool).
7. Start/pause button: This button has three functions
