30
Description of Parts
1. Suction inlet
2. Suction power regulator
3. On/off switch
4. Cable rewind button
5. Wheel
6. Dustin
7. Carrying handle
8. Dustbin open button
9. Hose
10. Telescopic tube
11. Metal extension tubes
12. Plastic tubes
13. Dual purpose floor nozzle
14. Crevice nozzle
15. Upholstery nozzle
16. Dustbin filter
17. Vertical parking
18. Horizontal parking
Important Safeguards
Do not switch the appliance on if it appears faulty in any way
Always remove the plug from the power socket when the appliance is not in use and be-
fore carrying out any cleaning or maintenance operations
Never leave the appliance unattended when it is switched on
Do not pull the appliance by the cord.
Do not unplug by pulling on the cord
Do not use the cleaner with a damaged cable
Do not use the appliance of wet surfaces or to vacuum liquids, mud, ash and burning ciga-
rette buds.
Do not vacuum any highly flammable or explosive substances or gasses.
Do not vacuum fine dust from plaster, concrete, flour or ash
Do not unplug the vacuum cleaner with wet hands
Do not operate the vacuum cleaner too close to heaters and radiators, stoves etc
Before you start using the vacuum cleaner, please remove large or sharp objects from the
floor to prevent damage to the dust bin and hose
Instructions for Use
Before placing into operation make certain that the filters and the dustbin are in the proper
position
Unwind a sufficient length of cable and insert the plug into the power socket. A YELLO
mark on the power cable shows the ideal cable length. Do not extend the cable beyond the
RED mark.
23
Continue using the programme and +/- buttons in this way to set the on/off times for
events 3-6 (2nd on/off and 3rd on/off)
NB it is not possible to programme times out of sequence
If you do not press and button at all for 3 or 4 minutes the unit will automatically return to
run mode.
Programming event times in 5/2 day mode
You can programme your timeswitch to come on and go off up to 3 times each day, to suit
your requirements, with one set of programmes for weekdays and a different set of pro-
grammes for the weekend.
Weekdays (MOTUWETHFR)
Press programme unit 1 shows along the top of the
display and MONTUWETHFR shows along the
bottom
Use the + and - buttons to set the time you want
your system to first come on in the morning
Press programme again to move to event 2
Use the + and - buttons to set the time you want your system to first go off
Continue using the programme and +/- buttons in this way to set the on/off times for
events 3-6 for weekdays.
Weekend (SASU)
Press programme again until 1 (event 1) shows along the top of the display and SASU
shows along the bottom of the display.
If at any time you wish to return to the
Factory preset programme, press
Select/advance/+/- buttons together at
The same time to reset the unit
NB it is not possible to programme times out of sequence
Running your programme
The 103E5 controls your heating and hot water together, turning them on and off at the
same times.
To run the central heating and hot water programme press the select button.
