SECTION 3
OPERATING THE SYSTEM
XPS-ProMail System Operations 4-24-14.doc 27
Software Setup Example
The printer can be used with many different software programs. The following information will
provide you with basic setup details, for some of the most common programs used with our
printers.
Printing from Satori Bulk Mailer® 5.0
Printer Drivers: Satori has developed their own printer drivers for use with their
software product. Therefore, Satori recommends that you load and use the printer
drivers available to you on the Satori Bulk Mailer 5.0 CD. If not, the Bulk Mailer software
may not function properly with the printer.
The following is a brief description of how to setup and print from Bulk Mailer 5.0.
1. Open Bulk Mailer 5 and select (open) the mailing list of your choice.
2. Use the Bulk Mailer 5 "Wizards" to setup your job.
This newer version of Bulk Mailer is driven by "Wizards", which will guide you through the
envelope design and layout process.
Your envelope design (layout) should look similar to the one shown below.
This example was designed for the Envelope Imager 1.5. Notice how the address data is
positioned at the top of the page, within the first 1.5 inches of the top of the page. When
using the XPS-ProMail 3.0 it can accommodate and print the first 3 inches of the page.
When using the XPS-ProMail 4.0, it can accommodate print on the first 4 inches of the page.
