Connect Systems Inc. - Model 9800 Page 16
2.2. Prefix Restrict A
0000 = None (display reads ' -')
x - xxxx = Multi Digit Prefix Restriction
DEFAULT: 1 = 'One' Digit Prefix Restriction (Long Distance)
A 'one' may only be set on this line in order for toll override
1-800 dialing to operate.
2.3. Prefix Restrict B
0000 = None (display reads ' -')
x - xxxx = Multi Digit Prefix Restriction
DEFAULT: 0 = 'Zero' Digit Prefix Restriction (Operator)
2.4. Prefix Restrict C
0000 = None (display reads ' -')
x - xxxx = Multi Digit Prefix Restriction (e.g. 976)
DEFAULT: - = None
2.5. Prefix Restrict D
0000 = None
x - xxxx = Multi Digit Prefix Restriction (e.g. 411)
DEFAULT: - = None
Lines 2.2., 2.3., 2.4., and 2.5. allow selecting any four single
digit or multi-digit sequences as restricted. Four digits in
sequence maximum. e.g. to restrict 0 (operator), 1 (long
distance), 976 and 411 enter 0 on line 2.2., enter 1 on line
2.3., enter 976 on line 2.4. and enter 411 on line 2.5.
NOTE: In programming area No. 4 you may create up to ten Toll
Override Selections which allow you to have the protection of
toll restriction, but allow you to dial specific area codes,
portions of an area code or specific phone numbers. See page 25.
2.6. Activity Timer
0 = Defeat
Select 10-99 (10-99 seconds)
1 sec increments per step
DEFAULT: 30 = 30 secs
Enter the patch activity timer time directly in seconds or enter
0 to defeat. The activity timer is reset by pressing the Mic
button in sampling or duplex mode. Or by pressing * in VOX mode
but only if you entered a 1 on line 0.7.
2.7. Timeout Timer
0 = Defeat
Select 1-99 (.5-49.5 minutes)
.5 minute increments per step
DEFAULT: 6 = 3 minutes
Select the maximum call limit time. The time is equal to .5
minutes (30 seconds) times the number you enter.
