19
ancelling or pausing a wash program
To stop a wash program once a wash cycle is in progress, you
n.
o The appliance will go onto PAUSE status and the wash program
At this stage you can either reselect a different wash program by
o IMPORTANT: You should only select a new wash program if the
o Alternatively you can turn the wash program control knob to the
o After the spin cycle has completed, the SPIN LED will stay lit for
o When it is possible to open the door, the END LED will light. At
Before opening the porthole door, you MUST
C
9
should turn the wash program control knob to the STOP positio
will be cancelled.
o
turning the wash program control knob to the one that you
require.
previous program was only a short way through the cycle.
SPIN position, to get the washer to pump out any water that
may be in the drum.
two minutes. IMPORTANT: There is a door lock mechanism that
stays engaged during this period of time. You should not attempt
to open the porthole door during this time.
this point you should switch the machine off using the On/Off
button. You can then open the porthole door and unload the
garments that you have washed.
select the SPIN program. Otherwise there
may still be water in the drum when you
open the door.
