17
electing a separate drying program
MPORTANT: Do not exceed the maximum loads listed in the
he timings in this table are approximate and refer to a wash load that
9 Load your laundry and then close the porthole door firmly.
Turn the drying time control knob clockwise, to select a suitable
9 Turn the wash program control knob clockwise to the DRY
9 Press the On/Off button and then press the Start button to get
o Whilst the drying cycle is in progress, the DRY LED will remain
During the last ten minutes of the drying cycle, the DRY LED will
o When the drying cycle has completed, you should not attempt to
n.
After you have completed a drying cycle, with particular
f
S
I
table below when drying.
T
has been spun at the maximum spin speed appropriate for that fabric
type.
9
drying time for the garments that you wish to dry.
position.
the drying cycle to commence.
lit.
o
flash on and off. This is to indicate that the cooling phase of the
drying cycle has been reached.
open the door of the appliance until the END LED is lit. At this
point you should switch the machine off using the On/Off butto
You can then open the porthole door and unload the garments
that you have dried.
garments there may be some threads left on the inside o
the drum. To prevent transfer of these threads onto the
next washload, we would recommend that you select a
separate rinse and drain cycle before washing more
garments.
