16
electing a wash program S
9 Load your laundry and put detergent in the relevant
Close the porthole door firmly.
9 Switch on the appliance using the On/Off button, the Start
9 Select the most appropriate wash program for the garments that
9 Select any program options that you require, by pressing the
Any program option that you select, will affect the length of time
o A particular program option can only be selected if the program
Press the Start button, the button will light; to show that the
o After approximately 5 seconds, you will hear your washing
o Whilst the wash program is in progress, the wash program
he
o After the spin cycle has completed, the SPIN LED will stay lit for
o When it is possible to open the door, the END LED will light. At
compartment(s) of the soap drawer.
9
button will flash.
you are washing, by turning the wash program control knob to
the most suitable program.
relevant program option button. The button will light up if a
program option is selected.
o
that the wash cycle will take to complete.
table advises that it is possible with the wash cycle you have
selected.
9
wash cycle has began.
machine start the wash cycle.
indicator neons will light. They will show you what stage of t
program the appliance has reached.
two minutes. IMPORTANT: There is a door lock mechanism that
stays engaged during this period of time. You should not attempt
to open the porthole door during this time.
this point you should switch the machine off using the On/Off
button. You can then open the porthole door and unload the
garments that you have washed.
