18
electing an automatic wash and dry program
9 Load your laundry and then close the porthole door firmly.
Turn the drying time control knob clockwise, to select a suitable
9 Select the most appropriate wash program for the garments that
9 Select any program options that you require, by pressing the
Any program option that you select, will affect the length of time
o A particular program option can only be selected if the program
Press the Start button, the button will light; to show that the
o After approximately 5 seconds, you will hear your washing
o Whilst the wash program is in progress, the wash program
he
Whilst the drying cycle is in progress, the DRY LED will remain
During the last ten minutes of the drying cycle, the DRY LED will
o When the drying cycle has completed, you should not attempt to
n.
o IMPORTANT: If you select a wash and dry program, your
.
S
9
drying time for the garments that you wish to dry.
you are washing, by turning the wash program control knob to
the most suitable program.
relevant program option button. The button will light up if a
program option is selected.
o
that the wash cycle will take to complete.
table advises that it is possible with the wash cycle you have
selected.
9
wash cycle has began.
machine start the wash cycle.
indicator neons will light. They will show you what stage of t
program the appliance has reached.
o
lit.
o
flash on and off. This is to indicate that the cooling phase of the
drying cycle has been reached.
open the door of the appliance until the END LED is lit. At this
point you should switch the machine off using the On/Off butto
You can then open the porthole door and unload the garments
that you have dried.
wash load must not be over 3 kg for cottons wash
programs and 1.5 kg for synthetics wash programs
