HAVE A QUESTION? CALL HART CLIENT CARE at 800-
252-2818, or EMAIL US AT [email protected] Page 7
KEY STICKER RANGEKEY STICKER RANGE
Before or during the inventory, you will need to key the range of stickers that were
used in the store. This will be done via the Hart web site.
1. Log onto www.hartsystems.com.
2. Click on the “Client Login” button , on the upper right side of the screen.
3. Enter your User Name and Password (both entries must be in lowercase) and press
ENTER or click on the OK button.
User Name: hx23301
Password: srce0489
4. Click in the “Enter Store Number” field and enter your store number.
5. Press TAB to advance to the “Enter Password” field. Enter your store-specific
password and press ENTER or click on the OK button.
Your Store-specific Password will be provided to you prior to your inventory, via a
flyer found with your inventory equipment and supplies.
6. You will now be connected to the “Inventory Overview” for your store. Click on
Inventory Functions from the menu bar.
7. Click on “Enter Sticker Ranges”.
You will key a separate sticker range for each area of your store (Backroom,
Sales Floor). You can key up to 5 individual ranges per Area.
8. At the field labeled “Starting Sticker”, key the 9-digit sticker control number of the very
FIRST sticker placed in the area you are keying and press the TAB key.
9. Next, at the field labeled “Ending Sticker”, key the 9-digit sticker control number of the
very LAST sticker placed in the area you are keying, and click OK.
Press TAB to enter the remaining range(s).
10. When finished entering the range(s), click OK.
11. A confirmation screen will be displayed to indicate that the range(s) have been
accepted. Click OK.
NOTE: If the range entered was not accepted, an error message will be displayed
and the range should be checked and re-entered.
