HAVE A QUESTION? CALL HART CLIENT CARE at 800-
252-2818, or EMAIL US AT [email protected] PLACING THE HART STICKERSPLACING THE HART STICKERS
Page 4
You will be using HART STICKERS to control the fixtures on the Floor Plan.
The stickers are attached to Fixture Sticker Sheets. There are 30
removable stickers on each sheet, which means there are 30 sticker
numbers on each sheet.
Each sticker has a pre-printed 9-digit control number; the first 4 digits are
the “series”; the next 4 digits (in parentheses) are the “Sticker Number”; the
last digit is a control check-digit.
For the most part, you will only be concerned with the
4-digit Sticker number.
The Sticker Number is always 4 digits long. This 4-digit number is part of
the control number and is always printed separately on the sticker, in the
box labeled STICKER NO. The first three numbers are the “page” number
and the fourth number is the sequence of the sticker on the page (0-9).
There are always three “pages” (set up as columns) to a sheet of
stickers.
The picture below is an example of a Hart Sticker. On the sample sticker
below, the 9-digit control number is 3003(956-0)1; 3003 is the series, 956-0
is the Sticker Number and 1 is the check-digit.
The sticker includes a scannable bar code and boxes for recording
information. After a sticker has been ended, the scanner will remind the
user to write their Initials in Box 1 (“Scanned By”); DO NOT write your
final count on the sticker.
