4 5
Power Source: 24V DC (operating range: 15 – 40V DC, supplied
from the SX-2000AI or SX-2100AI audio input unit) or DC input
power supple connector (when the optional AD-246 power supply
unit used)/Usable DC power supply plug: 0.2in outer diameter,
0.08in inner diameter 0.4in long, and non-polarity type
Current Consumption: 240mA or less
Audio Output: 0dB*, 600Ω, balanced
External Microphone Input: -40dB*, 2.2kΩ, unbalanced, mini jack,
for electret condenser microphone (phantom power supply. 3V DC)
Distortion: 1% or less
Frequency Response: 100Hz – 20kHz
S/N Ratio: 60dB or more
Microphone: Unidirectional electret condenser microphone with
AGC (ON/OFF selectable)
Chime: Built inside (PCM sound source), monitoring possible
using built-in speaker
Level Control: Microphone sensitivity control, monitor speaker
volume control, chime (adjustable using the software)
Connection Cable: Main line: Shielded CPEV cable( 1 pair of
audio wire + 1 pair of data wire + 1 pair of monitor/control wire +
1 pair of supply wire) or Shielded Category 5 twisted pair cable
(CAT5-STP)/Branch line: Shielded Category 5 twisted pair cable
(CAT5-STP), RJ45 connector
Maximum Cable Distance: 2625ft
Number of Connectable Expansion: Max. 4 units
Monitor Speaker: Built inside
Operation: Function switch, Covered switch, Broadcast switch
Indicator: Power indicator, Failure indicator, Function switch
indicator, Covered switch indicator, Broadcast switch indicator
Operating Temperature: 32°F to +104°F
Operating Humidity: 35% to 80% RH (no condensation)
Finish: ABS resin, blueish gray
Dimensions: 7.5 (W)
×
3 (H)
×
8.5 (D)in (excluding microphone)
Weight: 2lbs
*0dB = 1V
RM-200SA
Remote
Microphone
RM-210
Remote
Microphone
Extension
Current Consumption: 20mA max. (in terms of RM-200M's DC
power input)/75mA max. (in terms of DC power inputs of RM-
200X and RM-200XF)/80mA max. (in terms of DC power input of
RM-200SA and RM-200SF)
Connection: Connection by way of dedicated cable
Number of Function Keys: 10
Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)
Dimensions: 4.3 (W)
×
3 (H)
×
8.5 (D)mm
Weight: 1lbs
Accessory: Extension cable
×
1, Linkage bracket A
×
2, Linkage
bracket B
×
1, Screw for linkage bracket
×
12
Applicable Unit (option): RM-200SA, RM-200SF, RM-200M,
RM-200X, RM-200XF
RM-200RJ
Terminal Unit
Applied Voltage: 40V or less
Withstand Voltage: 1A
Voltage Indicator: Monitor terminals: Terminal No. 7 (+) and
terminal No. 8 (-), extinguish voltage: under 14A, lighting
voltage: 21V or more, indicator ON/OFF switchable
Connector: RJ45 connector: 1
Terminal: M3 screw terminal (10 pins), distance between
barriers+ 0.3in
Operating Temperature: 32°F to +104°F
Operating Humidity: 35% to 80% RH (no condensation)
Finish: Surface-treated steel plate, black, paint
Dimensions: 3.3 (W)
×
4.6 (H)
×
1 (D)in
Weight: 0.6lbs
SX-2000 Series System Image
VX-2000DS
Emergency Power Supply
Power Source: 230V AC, 50/60Hz
Power Consumption: 240W max
Applicable Battery: YUASA NP series (12V
×
2 or 4), Panasonic
LC-X1265PG/APG (65 Ah)
Charging Method: Trickle charging
Charging Current: 5A max
Charging Output Voltage: 27.3V ±0.3V (at 25°C)/
Temperature correction coefficient; -40mV/°C
Power Supply Input: 6 M4 screw terminal, distance between
barriers; 0.4in
DC Power Output: 6 (25A max. each) M4 screw terminal,
distance between barriers; 0.4in
Control Connector: RJ45 female connector for connecting
the VX-2000SF Surveillance Frame/Twisted-pair straight cable
(TIA/EIA-568A standard)/Type of control signal: Battery check,
AC power status, DC power status, charging circuit failure, and
battery failure
Battery Connection: 1 pair of positive and negative terminals/
Applicable cable diameter; AWG 6 – AWG 1/0
Operating Temperature: 32°F to +104°F
Finish: Panel; Surface-treated steel plate, black, 30% gloss, paint
Dimensions: 19 (W)
×
3.5 (H)
×
15 (D)in
Weight: 23lbs
Accessory: Rack mounting screw
×
4, Fiber washer
×
4, Blade
fuse (40A)
×
3, Fuse (T3.15A L)
×
1, Power cord (6.6ft)
×
1,
Insulating sheet
×
1, Attention label
×
1
