2 3
SX-2100AO
Audio Output Unit
Analog Link:
Input/Output Connector: Input: 1 input, RJ45 connector/
Output: 1 output, RJ45 connector
Connection Cable: Shielded Category 5 twisted pair cable for
LAN (CAT5-STP) (1 pair of audio wire + 1 pair of CPU OFF + 1
pair of control wire (system reset/standby) + 1 pair of connection
check wire)
Maximum Cable Distance: Total length of analog link: 2625ft
DS Link:
Usable Unit: VX-2000DS
Connector/Cable: 2 interface, RJ45 Connector, Shielded
Category 5 twisted pair cable (CAT5-STP)
Maximum Cable Distance: 16.4ft
CI/CO Link:
Usable Unit: VX-2000CI or SX-2000CO
Connector/Cable: 1 interface, RJ45 Connector, Shielded
Category 5 twisted pair cable (CAT5-STP)
Maximum Cable Distance: 2625ft
Speaker Line Failure Detection Section:
Connector/Cable: Removable terminal block. SP/AMP: 8 pins,
STANDBY AMP: 2 pins, AWG 24 – AWG 16
Maximum Input: 100Vrms, 5Arms
Fault Detection System: Short circuit, open circuit, ground fault
Method: Impedance or End of line
End of Line: In case of normal: Terminated by 470kΩ between
the speaker line and the shield/In case of open: Opened
between the speaker line and the shield/
Impedance: Minimum load: 2kΩ (5W) at 100V line
Control Input: 8 inputs, no-voltage make contact input, open
voltage: 40V DC, short-circuit current: 2mA, photo coupler input,
removable terminal block (6 pins)
Control Output: 8 outputs, C contact, no-voltage make contact
output, relay contact output (withstand voltage: 40V DC, control
current: 2 – 300mA), removable terminal block (6 pins)
Operating Temperature: 32°F to +104°F
Operating Humidity: 35% to 80% RH (no condensation)
Finish: Panel: Aluminum, black, alumite,
Case: Surface-treated steel plate
Dimensions: 19 (W)
×
3.5 (H)
×
13.7 (D)in
Weight: 15.7lbs
Accessory: Removable terminal plug (8 pins)
×
4, Removable
terminal plug (6 pins)
×
8, Removable terminal plug (4 pins)
×
1,
Removable terminal plug (3 pins)
×
1, Removable terminal plug
(2 pins)
×
1, Rack mounting screw
×
4
Power Source: Usable power supply unit: VX-200PS/
24V DC (operational range: 20V – 40V DC)/Two power inputs
construction enables dual- redundant power supply.
Current Consumption: 1.7A or less (maximum value in the
power operating range)/
1.2A or less (when operated on 24V DC)
Note: But except current consumption of the external equipment
of which power is supplied from the unit.
Indication: 18 alphanumeric characters, Level indication (8
outputs, monitor), Status indicators, Power indicator, Standby
indicator, CPU OFF indicator
Operation: Function button, Output level control, Monitor
speaker volume control, ON/OFF switch, Operation button
PA Link:
Audio Output: 8 outputs and standby AMP, 0dB*, suitable load:
600 ohms or above, electronically-balanced, RJ45 Connector/
monitoring possible using built-in speaker
Audio Output Characteristic: Frequency response: 20Hz – 20kHz/
Sampling frequency: 48kHz/D/A converter: 24 bit
Connection Cable: Shielded Category 5 twisted pair cable
(CAT5-STP)
Maximum Cable Distance: 16.4ft
Usable Amplifier: VP-2064, VP-2122, VP-2241 or VP-2421
(VP-200VX is required for each amplifier)
Local Audio Input:
Audio Input: 2 inputs, 0dB*, 10kΩ, electronically-balanced, RJ45
Connector
Audio Input Characteristic: Frequency response: 20Hz – 20kHz/
Sampling frequency: 48kHz/A/D converter: 24 bit
Control Input: 2 inputs, no-voltage make contact input, open
voltage: 12V DC, short-circuit: 2mA, photo coupler input
Connection Cable: Shielded Category 5 twisted pair cable
(CAT5-STP)
SX Link:
Network I/F: 2 100 BASE-TX circuits, RJ45 connector,
decentralized installation possible
Connection Cable/Device: Shielded Category 5 twisted pair
cable for LAN (CAT5-STP)
To be connected via the switching hub specified by TOA.
Note: This network must be made completely independent from
other LAN.
Maximum Cable Distance: 328ft (between this unit and a
switching hub)
SX-2000CI
Control Input Unit
Power Source: Usable power supply unit: VX-200PS/
24V DC (operational range: 20V – 40V DC)/Two power inputs
construction enables dual- redundant power supply.
Current Consumption: 0.7A or less (maximum value in the
power operating range)/0.55A or less (when operated on 24V DC)
Indication: Control input indicator (32), Power indicator, CPU
OFF indicator, FAULT indicator
Control Input: 32 inputs, no-voltage make contact input, open
voltage: 24V DC, short-circuit current: 2mA, photo coupler input,
removable terminal block (16 pins)
Surveillance Section for The Control Input Lines: Connection
resistance to make the function inactive: 20kΩ ±5%/Connection
resistance to make the function active: 10kΩ ±5%/Connector
cable: Twisted pair cable (shielded type is recommended)/
Maximum cable distance: 32.8ft
CI/CO Link:
Input/Output Connector: Input: 1 input, Output: 1 output, RJ45
connector
Connection Cable: Shielded Category 5 twisted pair cable
(CAT5-STP) (1 pair of data wire + 1 pair of control wire)
Maximum Cable Distance: 2625ft
24V DC Output:
Output Voltage: 24V DC ±10% or less
Maximum Feeding Current: 100mA
Connector: Removable terminal block (2 pins)
Operating Temperature: 32°F to +104°F
Operating Humidity: 35% to 80% RH (no condensation)
Finish: Panel: Aluminum, black, alumite,
Case: Surface-treated steel plate
Dimensions: 19 (W)
×
1.7 (H)
×
13 (D)in
Weight: 8lbs
Accessory: Removable terminal plug (16 pins)
×
4, Removable
terminal plug (4 pins)
×
1, Removable terminal plug (2 pins)
×
1,
Rack mounting screw
×
4
SX-2000CO
Control Output Unit
Operating Temperature: 32°F to +104°F
Operating Humidity: 35% to 80% RH (no condensation)
Finish: Panel: Aluminum, black, alumite,
Case: Surface-treated steel plate
Dimensions: 19 (W)
×
1.7 (H)
×
13 (D)in
Weight: 8lbs
Accessory: Removable terminal plug (6 pins)
×
16,
Removable terminal plug (4 pins)
×
1, Rack mounting screw
×
4
Power Source: Usable power supply unit: VX-200PS/
24V DC (operational range: 20V – 40V DC)/Two power inputs
construction enables dual- redundant power supply.
Current Consumption: 0.34A or less (maximum value in the
power operating range)/0.29A or less (when operated on 24V DC)
Indication: Control output indicator (32), Power indicator, CPU
OFF indicator, FAULT indicator
Control Output: 32 outputs, no-voltage make contact output,
relay contact output (withstand voltage: 40V DC, control current:
2 – 300mA), removable terminal block (6 pins)
CI/CO Link:
Input/Output Connector: Input: 1 input, Output: 1 output, RJ45
connector
Connection Cable: Shielded Category 5 twisted pair cable
(CAT5-STP) (1 pair of data wire + 1 pair of control wire)
Maximum Cable Distance: 2625ft
