4
Power Source: 24V DC (operating range: 15 – 40V DC,
supplied from the SX-2000AI or SX-2100AI audio input unit)
Current Consumption: 240mA or less
Audio Output: 0dB*, transformer-balanced
Distortion: 1% or less
Frequency Response: 200Hz – 15kHz
S/N Ratio: 55dB or more
Microphone: Unidirectional dynamic microphone with talk
key, AGC (ON/OFF switchable), microphone element failure
detectable by using a built-in small oscillator
Volume Control: Microphone volume control, Monitor speaker
volume control
Connection Cable: Shielded CPEV cable (each 1 pair of audio
wire, data wire, monitor/control wire and power supply wire) or
Shielded Category 5 twisted pair cable (CAT5-STP)
Maximum Cable Distance: 2625ft
Number of Connectable Expansion: Max. 5 units
Monitor Speaker: Built inside
Operation: Emergency key, Function keys, CPU switch, Reset
switch
Indicator: Status indicators, Power indicator, Failure indicator,
CPU indicator, Selection indicators, Microphone indicator,
Broadcast status indicator
Operating Temperature: 32°F to +104°F
Operating Humidity: 35% to 80% RH (no condensation)
Finish: ABS resin, blueish gray (PANTONE 538 or its equivalent)
Dimensions: 8 (W)
×
8.5 (H)
×
3.8 (D)in (with wall mounting
bracket unit)
Weight: 3.3lbs (with wall mounting bracket unit)
Accessory: EMC clamp x 1, Wall mounting bracket unit x 1, Wall
mounting screw x 2, Box mounting screw x 2
Option: Remote microphone extension: RM-210
Applicable Box: YS-11A
RM-200SF
Fireman's Microphone
Audio Input: 2 inputs, 0dB*, RJ45 Connector
Audio Input Characteristic:
Sampling Frequency: 48kHz
A/D Converter: 24 bit
Power Feed: Max. 1A per connector
Level Control: Audio input (0 to +12dB)
Finish: Panel: Pre-coated steel plate, black, 30%
gloss
Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in
Weight: 0.4lbs
* 0dB = 1V
Input: monaural x 2/-10dB*, 10k ohms, RCA pin jack
A/D converter: 24 bits
Frequency Response: 20Hz – 20kHz, ±1dB (+4dB*
input)
Sampling Frequency: 48 kHz
Dynamic range: 100dB (IHF-A weighted) or more
THD: 0.05% or less
Finish: Panel: Pre-coated steel plate, black, 30%
gloss
Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in
Weight: 0.32lbs
* 0dB = 0.775V
SX-200RM
Remote Microphone
Interface Module
D-936R
Stereo Select Input
Module
D-921E
Mic/Line Input Module
(24 bits Monaural
Type)
D-921F
Mic/Line Input Module
(24 bits Monaural
Type)
Input: 2 channels, Mic/Line changeable/
Mic; -50/-36dB*, 4.7kΩ, electronically-balanced,
equivalent to XLR-3-31 type/
Line; -10/+4dB*, 10kΩ, electronically-balanced,
equivalent to XLR-3-31 type/
Phantom power supply (can be used when set for
the microphone)
15V: (option: D-901, DP-K1, D-2008SP)
12V: (option: SX-2100AI)/
Ground lift switch
A/D Converter: 24 bits
Sampling Frequency: 48kHz
Frequency Response: 20Hz – 20kHz, ±1 dB (+4dB*
input)
Dynamic Range: 100 dB (IHF-A weighted) or more
(+4dB* input)
THD: 0.05% or less (+4dB* input)
Finish: Panel; Pre-coated steel plate, black , 30% gloss
Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in
Weight: 0.33lbs
* 0dB = 0.775V
Input: 2 channels, Mic/Line changeable/
Mic; -50/-36dB*, 4.7kΩ, electronically-balanced,
removable terminal block (3 pins)/
Line; -10/+4dB*, 10kΩ, electronically-balanced,
removable terminal block (3 pins)/
Phantom power supply (can be used when set for
the microphone)
15V: (option: D-901, DP-K1, D-2008SP)
12V: (option: SX-2100AI)/
Ground lift switch
A/D Converter: 24 bit
Sampling Frequency: 48kHz
Frequency Response: 20Hz – 20kHz, ±1dB (+4dB*
input)
Dynamic Range: 100dB (IHF-A weighted) or more
(+4dB* input)
THD: 0.05% or less (+4dB* input)
Finish: Panel; Pre-coated steel plate, black , 30% gloss
Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in
Weight: 0.31lbs
Accessory: Removable terminal block type
connector (preinstalled on the unit)
×
2
* 0dB = 0.775V
Input: 2 channels, -50/-36/-10/+4dB* (Selectable
with the DIP switch), 4.7kΩ, electronically-balanced,
equivalent to XLR-3-31 type/
Phantom power supply (can be set with DIP switch)
15V: (option: D-901, DP-K1, D-2008SP)
12V: (option: SX-2100AI)/
Ground lift switch (can be set with the DIP switch)
A/D Converter: 20 bits
Sampling Frequency: 48 kHz
Frequency Response: 20Hz – 20kHz, ±1dB (+4dB*
input)
Dynamic Range: 85dB (IHF-A weighted) or more
(+4dB* input)
THD: 0.2% or less (+4dB* input)
Finish: Panel; Pre-coated steel plate, black, 30% gloss
Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in
Weight: 0.3lbs
* 0dB = 0.775V
D-922F
Mic/Line Input Module
(20 bits Monaural
Type)
D-922E
Mic/Line Input Module
(20 bits Monaural
Type)
Input: 2 channels, -50/-36/-10/+4dB* (Selectable
with the DIP switch), 4.7kΩ, electronically-balanced,
removable terminal block (3 pins)/
Phantom power supply (can be set with the DIP switch)
15V: (option: D-901, DP-K1, D-2008SP)
12V: (option: SX-2100AI)/
Ground lift switch (can be set with the DIP switch)
A/D Converter: 20 bits
Sampling Frequency: 48 kHz
Frequency Response: 20Hz – 20kHz, ±1dB (+4dB*
input)
Dynamic Range: 85dB (IHF-A weighted) or more
(+4dB* input)
THD: 0.2% or less (+4dB* input)
Finish: Panel; Pre-coated steel plate, black, 30% gloss
Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in
Weight: 0.26lbs
Accessory: Removable terminal block type
connector (preinstalled on the unit)
×
2
* 0dB = 0.775V
SX-2000 Series Modules
SX-2000 Series Microphones and Optional Accessories
